《Beginning STM32:Developing with FreeRTOS,libopencm3 and GCC》电子书分享

zero99 · 发表于 2018-6-6 13:56:19

从社区某大佬处GET两本不错的STM32学习书籍，赶紧上传分享
英文版的，原汁原味

多金小伙伴请无视，直接购买纸质版（下方有购买链接）

一、《Beginning STM32: Developing with FreeRTOS, libopencm3 and GCC》

Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more.

Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You’ll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you’ll leverage FreeRTOS to create tasks, queues, and mutexes. You’ll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers.

为了尊重劳动成果，回帖即可下载：

Apress.Beginning.STM32.Developing.with.FreeRTOS.libopencm3.and.GCC.1484236238.pdf (7.69 MB, 下载次数: 1822)