本帖最后由 strang 于 2017-4-9 16:39 编辑
收到板子有一段时间了，由于个人原因一直没来得及学习，最近终于有了空闲时间玩了一下板子，在此感谢ST，感谢社区让我有机会能学习NUCLEO-STM32L496ZG开发板！ 首先来个开发板靓照： 开发板特性： - STM32 microcontroller in LQFP144 package
- SMPS: significantly reduces power consumption in Run mode, by generating Vcore logic supply from an external DC/DC converter. This function is only available on ‘-P’ suffixed boards
- 3 user LEDs
- 2 push-buttons: USER and RESET
- LSE crystal:
- 32.768 kHz crystal oscillator
- 2 types of extension resources:
- ST Zio connector including: support for Arduino™ Uno V3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals
- ST morpho extension pin header footprints for full access to all STM32 I/Os
- USB OTG or full-speed device with Micro-AB connector
- 4 source options for power supply:
- E5V from ST morpho connectors
- ST-LINK/V2-1 USB connector
- USB charger
- VIN (7 - 12 V) from ST Zio connector
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
- ST-LINK/V2-1 standalone kit capability
- USB re-enumeration capability: virtual COM port, mass storage, debug port
- Comprehensive free software HAL and LL libraries including a variety of software examples
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™ , Keil® , GCC-based IDEs
开发环境搭建：
电脑系统：windows10
MDK： V5.23
STM32CubeMX : 4.20.1
ST官网下载ST-Link驱动 ：
en.stsw-link009.zip
(5.07 MB, 下载次数: 6)
| 
